雜志介紹

Journal Of Micromechanics And Microengineering雜志介紹

《Journal Of Micromechanics And Microengineering》是一本以English為主的未開放獲取國際優秀期刊，中文名稱微機械與微工程雜志，本刊主要出版、報道工程技術-ENGINEERING, ELECTRICAL & ELECTRONIC領域的研究動態以及在該領域取得的各方面的經驗和科研成果，介紹該領域有關本專業的最新進展，探討行業發展的思路和方法，以促進學術信息交流，提高行業發展。該刊已被國際權威數據庫SCIE收錄，為該領域相關學科的發展起到了良好的推動作用，也得到了本專業人員的廣泛認可。該刊最新影響因子為2.4，最新CiteScore 指數為4.5。

本刊近期中國學者發表的論文主要有：

• Loss mechanisms of multi-frequency whispering gallery mode RF-MEMS resonators

  Author: Liu, Wenli; Chen, Zeji; Lu, Yujie; Zhao, Junyuan; Zhu, Yinfang; Yang, Jinling; Yang, Fuhua

• Remote actuation based on magnetically responsive pillar arrays

  Author: Jiang, Wei; Wang, Lanlan; Chen, Bangdao; Liu, Hongzhong

• Fatigue life evaluation of gold wire bonding solder joints in MEMS pressure sensors

  Author: Zhang, Yunfan; Wu, Kangkang; Shen, Shengnan; Zhang, Quanyong; Cao, Wan; Liu, Sheng

• Topology optimization design of compliant amplification mechanisms with low parasitic displacement

  Author: Wang, Qiliang; Wei, Jianming; Long, Yiping; Tan, Jianping

英文介紹

Journal Of Micromechanics And Microengineering雜志英文介紹

Journal of Micromechanics and Microengineering (JMM) primarily covers experimental work, however relevant modelling papers are considered where supported by experimental data.

The journal is focussed on all aspects of:

-nano- and micro- mechanical systems

-nano- and micro- electomechanical systems

-nano- and micro- electrical and mechatronic systems

-nano- and micro- engineering

-nano- and micro- scale science

Please note that we do not publish materials papers with no obvious application or link to nano- or micro-engineering.

Below are some examples of the topics that are included within the scope of the journal:

-MEMS and NEMS:

Including sensors, optical MEMS/NEMS, RF MEMS/NEMS, etc.

-Fabrication techniques and manufacturing:

Including micromachining, etching, lithography, deposition, patterning, self-assembly, 3d printing, inkjet printing.

-Packaging and Integration technologies.

-Materials, testing, and reliability.

-Micro- and nano-fluidics:

Including optofluidics, acoustofluidics, droplets, microreactors, organ-on-a-chip.

-Lab-on-a-chip and micro- and nano-total analysis systems.

-Biomedical systems and devices:

Including bio MEMS, biosensors, assays, organ-on-a-chip, drug delivery, cells, biointerfaces.

-Energy and power:

Including power MEMS/NEMS, energy harvesters, actuators, microbatteries.

-Electronics:

Including flexible electronics, wearable electronics, interface electronics.

-Optical systems.

-Robotics.